Throttle Body: Removal
- REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
(See REMOVAL
)
- REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
(See REMOVAL
)
- REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
(See REMOVAL
)
- DRAIN ENGINE COOLANT
(See REPLACEMENT
)
- REMOVE V-BANK COVER SUB-ASSEMBLY
(See REMOVAL
)
- REMOVE AIR CLEANER HOSE ASSEMBLY
(See REMOVAL
)
- REMOVE THROTTLE BODY ASSEMBLY
- Disconnect the 2 water by-pass hoses.
- Disconnect the throttle position sensor and control motor connector.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the 4 bolts, throttle body and gasket.
- Remove the 2 water by-pass hoses from the throttle body.