Customize Parameters
HINT:
The following items can be customized.
NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- CUSTOMIZING FUNCTION WITH TECHSTREAM
- POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
Tilt & Telesco
TILT & TELESCO REFERENCEDisplay Default Contents Setting Autoaway / Return function ON Turn the auto away/return function ON/OFF ON/OFF - INTUITIVE PARKING ASSIST SYSTEM
Warning
WARNING REFERENCEDisplay Default Contents Setting Rr Sensor Onset Range Wide Sets the buzzer activation range for the rear sensors. Narrow or Wide Keep Sense Buzzer Avail Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail Fr & Rr Buzzer Volume H Changes the buzzer volume setting. L, M1, M2, M3 or H Sensor
SENSOR REFERENCEDisplay Default Contents Setting Sensor Condition N Avail Makes the sensors available when the shift lever is in N. Not Avail or Avail Reverse Range Front Sensor F Changes the operation setting for the vehicle front sensors when the shift lever is in R. F or F Stop Non P/R Range Rear Sensor R Stop Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R. R, Rcrn or R Stop Display
DISPLAY REFERENCEDisplay Default Contents Setting Approach Display OFF Avail The display when moving away from a previously detected obstacle. Not Avail or Avail Display Mode All The display mode setting (when the intuitive parking assist system is normal). All or Undisp - POWER DOOR LOCK CONTROL SYSTEM
Door Lock
DOOR LOCK REFERENCEDisplay Default Contents Setting Unlock Key Twice ON Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON/OFF Auto Lock OFF Function that locks all doors when the vehicle speed reaches a certain level. ON/OFF Auto Lock/Shift ON With the engine running and all doors closed, function that locks all doors when the shift lever is moved from P to any position other than P. ON/OFF Auto Unlock/Shift ON Function that unlocks all doors when the shift lever is moved to P from any position other than P while the engine switch is on (IG). ON/OFF All Unlock/Open-Close OFF Function that unlocks all other doors when opening the driver door within 10 seconds of turning the engine switch on (IG). ON/OFF - WIRELESS DOOR LOCK CONTROL SYSTEM
Wireless Door Lock
WIRELESS DOOR LOCK REFERENCEDisplay Default Contents Setting Wireless Control ON Function that turns the wireless door lock function on or off. ON/OFF Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF Open Door Warning ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds. ON/OFF Unlock 2 Operation ON Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON / OFF Panic Alarm Function ON Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 1 second or more. ON/OFF Wireless Buzzer Volume Level 7 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level 6/Level 7 Auto Lock Time 60s Function to change the time until relocking after unlocking with the wireless door lock function. 30s/60s/120 s Wireless Auto Lock ON Function to control the automatic relocking of doors after unlocking with the wireless door lock function. ON/OFF - SMART KEY SYSTEM (for Entry Function)
Smart Key / Access
SMART KEY / ACCESS REFERENCEDisplay Default Contents Setting Park Wait Time*1 2.5s Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function. 0.5s/1.5s/2.5s/5s Ignition Area*2 ALL Function to choose the available area for the key to start the engine and cancel the steering lock. FRONT/ALL*3 Back Door Opening Operation*4 LONG Back door opening the operation. LONG/TWICE/OFF Warning
WARNING REFERENCEDisplay Default Contents Setting Key Low Battery Waming*5 ON Function that warns the driver that the key battery power is low. ON/OFF HINT:
*: "FRONT" means front, and "ALL" means front, rear 1 and rear 2. - ENTRY UNLOCK MODE SWITCHING FUNCTION
- To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds. When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: driver door unlock mode, all door unlock mode.NOTE: After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.
- All door unlock mode:
When a touch sensor is touched, all doors unlock.
- Driver door unlock mode (default): When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.
- All door unlock mode:
- The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and changes the smart key system to the entry unlock mode.
- The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.
HINT:
The function only changes the entry unlock mode of the smart key system. It does not switch the unlocking of the wireless door lock control.
- Driver door unlock mode:
- All door unlock mode:
- To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds. When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: driver door unlock mode, all door unlock mode.
- SMART KEY SYSTEM (for Start Function)
Smart Key / Access
SMART KEY / ACCESS REFERENCEDisplay Default Content Setting Ignition Available Area All Function to choose the available area for the key to start the engine and cancel the steering lock. Front/All - THEFT DETERRENT SYSTEM
Security
SECURITY REFERENCEDisplay Default Contents Setting Passive Mode (Security System) OFF Passive arming mode is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed.
In passive arming mode, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see entry delay below) after door is opened:- Unlock any door by key or wireless operation
- Turn engine switch on (IG)
ON/OFF Warning by Horn ON Function that allows vehicle horns and security horn to be used as warning device. ON/OFF Entry Delay Time 14 s Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE. 0s/14s/30 s - METER AND GAUGE SYSTEM
Warning
WARNING REFERENCEDisplay Default Contents Setting Driver Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer. ON/OFF Front Passenger Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer. ON/OFF Unit Conversion
UNIT CONVERSION REFERENCEDisplay Default Contents Setting Units By Region Different for each vehicle To change the units of the display. Km/I JP / Km/I / Mi/g US / Mi/g UK Display
DISPLAY REFERENCEDisplay Default Contents Setting Language None To change the language. Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd - AIR CONDITIONING SYSTEM
Air Conditioner
AIR CONDITIONER REFERENCEDisplay Default Contents Setting Set Temperature Shift Normal Function to set the temperature shift. +2 C/+1 C/Normal/-1 C/-2 C Evaporator Control Automatic Function to set the evaporator control to the automatic position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up. Manual/Automatic Compressor/Air Inlet DEF operation Link Function to automatically turn the A/C on when the FRONT DEF button is pressed. Normal/Link Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Manual/Automatic Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Manual/Automatic Foot/DEF Auto Mode ON Function to turn the airflow from FOOT/DEF on automatically when auto mode is on. ON/OFF Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the defroster is on. ON/OFF Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature. +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C Button Press Buzzer ON Function to sound a buzzer when a button is pressed. ON/OFF - POWER WINDOW CONTROL SYSTEM
Power Window
POWER WINDOW REFERENCEDisplay Default Contents Setting Door Key P/W Up ON Function that raises all the power windows when, with the engine switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 sec. ON/OFF Door Key P/W Down ON Function that lowers all the power windows when, with the engine switch off, a key is used to hold driver door key cylinder to the unlock position for more than 2.3 sec. ON/OFF P/W Down W/ Transmit ON Function that lowers all the power windows when, with the engine switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec. ON/OFF P/W Up W/ Smart ON Function that raises all the power windows when, with the engine switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 sec. ON/OFF - SLIDING ROOF SYSTEM
Slide Roof
SLIDE ROOF REFERENCEDisplay Default Contents Setting Door Key Related Open ON The function to manually open the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off. ON/OFF Door Key Related Close ON The function to manually close the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to lock position when the engine switch is off. ON/OFF Wireless Key Related Open ON The function to manually open the sliding roof linked with the power window if pressing transmitter the unlock switch for 3 seconds or more when the engine switch is off. ON/OFF Door Handle Lock Button ON The function to manually close the sliding roof linked with the power window if pushing the door lock switch for 3 seconds or more when the engine switch is off and the key is outside vehicle. ON/OFF Door Key Related Operation Slide The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off. Tilt/Slide Wireless Key Related Operation Slide The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by pressing on the transmitter unlock switch for 3 seconds or more when the engine switch is off. Tilt/Slide - LIGHTING SYSTEM
Light Control
LIGHT CONTROL REFERENCEDisplay Default Contents Setting Disp Ex ON Sen NORMAL Changes brightness when lowering lights such as the combination meter indicator light, A/C indicator light, and clock light*2. LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 Disp Ex OFF Sen NORMAL Changes brightness when canceling lowering lights such as the combination meter indicator light, A/C indicator light, and clock light*3. LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 Light Auto OFF Delay 30s Function to continue illuminating the headlights for a certain period of time after closing all the doors with the engine switch turned from on to off under the condition that the light control switch is at head or AUTO with the headlights ON. OFF/30s/60s/90s Sensitivity NORMAL Function to adjust the sensitivity of the lighting illumination*1 LIGHT2/LIGHT1/NORMAL/DARK1/DARK2 DRL Function ON DRL Control ON/OFF Illuminated Entry
ILLUMINATED ENTRY REFERENCEDisplay Default Contents Setting Lighting Time 15s To change the lighting time after closing the door (it will quickly fade out in the case of turning the engine switch on (IG)). 7.5s/15s/30s I/L when ACC OFF ON Function to light the interior light when the engine switch is turned from on (IG) to off. ON/OFF I/L ON W/Door Key Unlock ON Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON/OFF Room Light when Aprchd ON Dome light illumination (when approaching vehicle) ON/OFF HINT:
*1: The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
*1
*2
*3
- POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM