Abs And Traction Actuator: Removal

DRAIN BRAKE FLUID
NOTE: Wash brake fluid off immediately if it adheres to any painted surface.
REMOVE FRONT WHEEL RH
REMOVE FRONT FENDER LINER RH
REMOVE FRONT BUMPER COVER
1. Remove the front bumper cover (See REMOVAL ).
REMOVE LH HEADLIGHT ASSEMBLY
1. Remove the LH headlight assembly (See REMOVAL ).
REMOVE WINDSHIELD WASHER JAR ASSEMBLY
REMOVE BRAKE ACTUATOR WITH BRACKET
1. Disconnect the actuator connector.
2. Using SST, disconnect the 6 brake tubes from the actuator with bracket.
  SST 09023-00101
  
  Fig 1: Identifying Brake Tubes
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Use tags or make a memo to identify the places to reconnect.
  
  Fig 2: Identifying Brake Tubes
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 bolts, nut and the actuator with bracket.
  NOTE: Be careful not to damage the brake tubes and wire harness.
REMOVE ABS AND TRACTION ACTUATOR ASSEMBLY
1. Remove the 2 nuts and ABS and traction actuator assembly from the bracket.
  
  Fig 3: Identifying ABS And Traction Actuator Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002