System Outline

The moon roof can be operated when the ignition SW is turned to the ON position.

1. Slide Open Operation 

   The moon roof will fully open automatically after simply pressing the slide open button on the moon roof control SW once. If the moon roof control switch is pressed again while the moon roof is operating, the operation will stop immediately. The slide open operation will not work when the moon roof is in the tilt up position.

2. Slide Close Operation 

   If you hold down the slide close button on the moon roof control SW when the moon roof is open, the moon roof closes half way and then stops the operation automatically. If you release and then hold the slide close button again, the moon roof will close fully.

3. Tilt Up Operation 

   If you press the tilt up button on the moon roof control SW, the moon roof will tile up. However, the moon roof will not tile up when it is open.

4. Tilt Down Operation 

   If you press the tilt down button when the moon roof is tilted up, the moon roof will tilt down.