Service Data
1ZZ-FE STARTING SERVICE DATA SPECIFICATION
| Starter assembly | ||
|---|---|---|
| Specified current | 90 A or less at 11.5 V | |
| Starter relay assembly | ||
| Resistance (3 - 5) | Standard | 10 kΩ or higher Below 1 Ω (Apply battery voltage to terminals 1 and 2) |
| Magnetic switch resistance | Terminal 50 - C | 1 Ω or lower |
| Terminal 50 - Switch body | 2 Ω or lower | |
| Starter armature | ||
| Resistance | Segments | 1 Ω or lower |
| Commutator-Armature coil | 10 kΩ or higher | |
| Commutator depth | Standard | 3.1 mm (0.122 in.) |
| Maximum | 3.8 mm (0.150 in.) | |
| Starter commutator end frame assembly | ||
| Brush length | Standard | 9.0 mm (0.354 in.) |
| Minimum | 4.0 mm (0.158 in.) | |
| Resistance Positive (+) brush - Positive (-) brush |
Standard | 10 kΩ or higher |
| Snap ring | ||
| Length | Maximum | 5.0 mm (0.197 in.) |
| Ignition or starter switch assembly | ||
| Resistance | LOCK | 10 kΩ or higher |
| ACC | Below 1 Ω | |
| ON | Below 1 Ω | |
| START | Below 1 Ω | |