LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Matrix Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1ZZ-FE) >> Circuit Opening Relay >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Opening Relay: Inspection

  1. INSPECT E.F.I. CIRCUIT OPENING RELAY ASSEMBLY 
    1. Inspect the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Resistance 

        TESTER CONNECTIONS AND SPECIFIED CONDITIONS

        Tester Connection Specified Condition
        3 - 5 10 kΩ or higher
        3 - 5 Below 1 Ω (Apply battery voltage to terminal 1 and 2)
        Fig 1: Identifying E.F.I. Circuit Opening Relay Assembly
        G05192728Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the E.F.I, circuit opening relay assembly.

scientia non olet · About LEMON Manuals