LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Matrix Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1ZZ-FE) >> Ignition Relay No. 1 >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Relay No. 1: Inspection

  1. INSPECT IGNITION RELAY NO. 1 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Resistance 

        TESTER CONNECTIONS AND SPECIFIED CONDITIONS

        Tester Connection Specified Condition
        3 - 5 10 kΩ or higher
        3 - 5 Below 1 Ω (Apply battery voltage to terminal 1 and 2)
        Fig 1: Identifying Ignition Relay No. 1
        G05192726Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the ignition ECU relay.

scientia non olet · About LEMON Manuals