Front Speed Sensor: Installation

INSTALL SPEED SENSOR FRONT LH
1. Install the speed sensor front LH with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  NOTE: Make sure the sensor tip is clean.
  
  Fig 1: Identifying Speed Sensor Front LH Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the sensor harness clamp with the 2 bolts "A" and "B" to the body and shock absorber.
  Torque:
  
  Bolt A
  
  8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Bolt B
  
  29 N*m (296 kgf*cm, 21 ft.*lbf)
  
  Fig 2: Identifying Sensor Harness Clamp Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the speed sensor connector.
4. Connect the speed sensor wire harness clamp to the body.
INSTALL FRONT FENDER LINER LH
INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
CHECK ABS SPEED SENSOR SIGNAL
HINT:

See TEST MODE PROCEDURE