LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1ZZ-FE) >> SFI System >> DTC P0111 Intake Air Temperature Sensor Gradient Too High >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111) 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the tester on.
    4. Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.
    5. Read DTCs.

      Result 

      DTC RESULT DESCRIPTION CHART

      Result Proceed to
      P0111 and other DTCs A
      P0111 B

      HINT:

      If any DTCs other than P0111 are output, troubleshoot those DTCs first.

    B : REPLACE MASS AIR FLOW METER 

    A: Go TO DTC CHART (See  DIAGNOSTIC TROUBLE CODE CHART   )