Inspection Procedure
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111)
- Connect Techstream to the DLC3.
- Turn the power switch ON (IG).
- Turn the tester on.
- Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.
- Read DTCs.
Result
RESULT CHARTResult Proceed to P0111 and other DTCs A P0111 B HINT:
If any DTCs other than P0111 are output, troubleshoot those DTCs first.
B: REPLACE MASS AIR FLOW METER (See ON-VEHICLE INSPECTION )
A: GO TO DIAGNOSTIC TROUBLE CODE CHART