Front Speed Sensor: Installation

1. Using a 5 mm hexagon wrench, install the front speed sensor with the bolt.

   Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf) 

   NOTE: Make sure that the sensor tip is clean.
   Fig 1: Identifying Front Speed Sensor Wire Connector And Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the skid control sensor wire.

Torque: 112 N*m (1,137 kgf*cm, 82 ft.*lbf) 

Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

(See TEST MODE PROCEDURE  )