LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Fuel System >> Fuel Sender Gauge Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Sender Gauge Assembly: Installation

  1. INSTALL THE FUEL SENDER GAUGE ASSEMBLY 
    1. Install the fuel sender gauge onto the fuel suction with pump and gauge tube.
      2. Fig 1: Installing Fuel Sender Gauge Assembly
      G05114023Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the fuel sender gauge connector.
      3. Fig 2: Locating Fuel Sender Gauge Connector
      G05114020Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (See  INSTALLATION   ) 
  3. INSTALL FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE (See  INSTALLATION   ) 
  4. INSTALL FUEL TANK ASSEMBLY (See  INSTALLATION   ) 
  5. CONNECT FUEL TANK VENT HOSE (See  INSTALLATION   ) 
  6. CONNECT FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE (See  INSTALLATION   ) 
  7. CONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY (See  INSTALLATION   ) 
  8. CONNECT FUEL TANK TO FILLER PIPE HOSE (See  INSTALLATION   ) 
  9. INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (See  INSTALLATION   ) 
  10. INSTALL REAR FLOOR SERVICE HOLE COVER (See  INSTALLATION   ) 
  11. INSTALL REAR SEAT CUSHION ASSEMBLY LH (See  INSTALLATION  ) 
  12. INSTALL REAR DOOR SCUFF PLATE LH (See  INSTALLATION  ) 
  13. INSTALL FRONT DOOR SCUFF PLATE LH (See  INSTALLATION  ) 
  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

  15. CHECK FOR FUEL LEAK (See  ON-VEHICLE INSPECTION   ) 
scientia non olet · About LEMON Manuals