Service Data
ENGINE CONTROL SYSTEM - SERVICE DATA SPECIFICATION
| Camshaft timing oil control valve assembly | OCV OFF | Standard | Normal engine speed | |
|---|---|---|---|---|
| OCV ON | Rough idle or engine stalled | |||
| Throttle body | Throttle POS value | Standard | 60 % or more | |
| Resistance | 1 (M-) - 2 (M+) | Standard | 0.3 to 100 Ω at 20°C(68°F) | |
| Accelerator pedal position sensor (ACCEL POS#1) | Voltage | Accelerator pedal released | Standard | 0.5 to 1.1 V |
| Accelerator pedal depress | 2.5 to 4.5 V | |||
| Accelerator pedal position sensor (ACCEL POS#2) | Voltage | Accelerator pedal released | Standard | 1.2 to 2.0 V |
| Accelerator pedal depress | 3.4 to 5.0 V | |||
| Camshaft timing oil control valve assembly | Resistance | 1 (+B) - 2 (GND) | Standard | 6.9 to 7.9 Ω at 20°C (68°F) |
| Mass air flow meter | Standard | 0.72 g/sec | ||
| Engine coolant temperature sensor | Resistance | 1 (E2) - 2 (THW) | Standard | 2.32 to 2.59 kΩ at 20°C (68°F) |
| 0.310 to 0.326 kΩ at 80°C (176°F) | ||||
| Knock sensor | Resistance | 1 (Ground) - 2 (Out put) | 120 to 180 kΩ at 20°C(68°F) | |
| Circuit opening relay | Resistance | 3-5 | Standard | 10 kΩ or higher |
| Below 1 Ω | ||||
| 1-2 | Below 1 Ω (Apply battery voltage to terminals 1 and 2) | |||
| EFI relay | Resistance | 3-5 | Standard | 10 kΩ or higher |
| Below 1 Ω (Apply battery voltage to terminals 1 and 2) | ||||
| Crankshaft position sensor | Resistance | 1 -2 | Standard | 1,850 to 2,450 Ω at 20°C (68°F) |
| Fuel pump relay | Resistance | 1-2 | Standard | Below 1 Ω |
| 3-4 | Below 1 Ω | |||
| 3-5 | 10 kΩ or higher | |||
| 3-4 | 10 kΩ or higher (Battery voltage applied to terminal 1 and 2) | |||
| 3-5 | Below 1 Ω (Battery voltage applied to terminal 1 and 2) | |||