Fuel Pressure Regulator: Removal

DISCHARGE FUEL SYSTEM PRESSURE (See REMOVAL )
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER HOSE ASSEMBLY (See REMOVAL )
REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
1. Disconnect the No. 2 fuel tube from the pressure regulator (See FUEL SYSTEM ).
  CAUTION: Put a cloth or equivalent under the pressure regulator.
  
  Fig 1: Locating No. 2 Fuel Tube From Pressure Regulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the vacuum sensing hose from the pressure regulator.
  
  Fig 2: Locating Vacuum Sensing Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 bolts, and pull out the pressure regulator.
4. Remove the O-ring from the pressure regulator.
Fig 3: Locating Pressure Regulator Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002