Camshaft Position Sensor: Removal

REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER HOSE ASSEMBLY (See REMOVAL )
REMOVE CAMSHAFT POSITION SENSOR
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
  
  Fig 1: Locating Sensor Connector Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR
1. Disconnect the 4 sensor connectors.
2. Remove the 4 bolts and 4 sensors.
  
  Fig 2: Locating VVT Sensor Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002