Engine Coolant Temperature Sensor: Removal
- REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
(See
REMOVAL
)
- REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
(See
REMOVAL
)
- REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
(See
REMOVAL
)
- DRAIN ENGINE COOLANT
(See
REPLACEMENT
)
- REMOVE V-BANK COVER SUB-ASSEMBLY
(See
REMOVAL
)
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Disconnect the sensor connector.
- Using a 19 mm deep socket wrench, remove the sensor.
- Remove the gasket from the sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002