LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Circuit Tests And Service Information >> Heated Oxygen Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Oxygen Sensor: Removal

CAUTION:
  • The procedures should be performed by at least 2 people.
  • Wear protective gloves when removing the exhaust pipe.
  • The exhaust pipe is extremely hot immediately after the engine has stopped.
  • Confirm that the exhaust pipe has cooled down before removing it.
  1. REMOVE NO. 2 ENGINE UNDER COVER  (See REMOVAL )
  2. REMOVE TAILPIPE ASSEMBLY  (See REMOVAL )
  3. REMOVE CENTER EXHAUST PIPE ASSEMBLY  (See REMOVAL )
  4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY  (See REMOVAL )
  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY  (See REMOVAL )
  6. REMOVE HEATED OXYGEN SENSOR (Bank 2 Sensor 2) 
    1. Using SST, remove the sensor.

      SST 09224-00010 

      Fig 1: Identifying Heated Oxygen Sensor With SST
      G05150059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 2 HEATED OXYGEN SENSOR (Bank 1 Sensor 2) 
    1. Using SST, remove the sensor.

      SST 09224-00010 

      Fig 2: Identifying Heated Oxygen Sensor With SST
      G05150059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals