Crankshaft Position Sensor: Installation

INSTALL CRANK POSITION SENSOR
1. Apply a light coat of engine oil to the O-ring on the crank position sensor.
  
  Fig 1: Locating O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the crank position sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7.4 ft.*lbf)
3. Connect the crank position sensor connector.
INSPECT FOR OIL LEAK
INSTALL ENGINE UNDER COVER RH

Fig 2: Locating Bolt And Crank Position Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002