LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Fuel System (2ZR-FE) >> Fuel Sender Gauge Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Sender Gauge Assembly: Installation

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY 
    1. Install the fuel sender gauge assembly by sliding it downward.
      NOTE: Do not damage the wire harness.
    2. Connect the connector of the fuel sender gauge assembly.
      NOTE: Make sure that the fuel sender gauge arm does not bend.
      Fig 1: Locating Fuel Sender Gauge Assembly Connector
      G06009825Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL SUCTION TUBE ASSEMBLY 
    1. Install the fuel suction tube assembly to the fuel tank assembly (See INSTALLATION  ).
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. INSPECT FOR FUEL LEAK  (See ON-VEHICLE INSPECTION )
scientia non olet · About LEMON Manuals