Crankshaft Position Sensor: Installation
- INSTALL CRANKSHAFT POSITION SENSOR
- Install the sensor with the bolt.
Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
- Connect the sensor connector.
- Install the sensor with the bolt.
- INSTALL ENGINE UNDER COVER RH
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see INITIALIZATION
).