April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

CHECK WHETHER DTC OUTPUT RECURS (DTC P0607)

Connect Techstream to the DLC3.
Turn the power switch ON (IG) and turn the tester on.
Clear the DTCs (See DTC CHECK / CLEAR ).
Turn the power switch OFF and turn the tester off.
Disconnect the battery negative terminal and wait for 1 minute.
Connect the battery negative terminal.
Turn the power switch ON (IG) and turn the tester on.
Select the following menu items: Powertrain / Engine and ECT / Trouble Code.

Read the DTCs.

Result

RESULT CHART

Display (DTC output)	Proceed to
P0607	A
No output	B

B: CHECK FOR INTERMITTENT PROBLEMS

A: REPLACE ECM