Customize Parameters

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

AIR CONDITIONING SYSTEM

Air conditioning amplifier

AIR CONDITIONING AMPLIFIER SPECIFICATIONS

Display (Item)	Default	Contents	Setting
Set Temperature Shift	NORMAL	To control with the shifted temperature against the display temperature.	+2C / +1C / NORMAL / -1C / -2C
Air Inlet Mode	AUTO	In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode.	MANUAL/AUTO
Compressor Mode	AUTO	Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF.	MANUAL/AUTO
Compressor/Air Inlet DEF Operation	LINK	Function to turn the A/C ON automatically linking with the FRONT DEF button when the A/C is OFF.	NORMAL / LINK
Foot/DEF Auto Mode	ON	Function to turn the air flow from FOOT/DEF to ON automatically when AUTO MODE is ON.	OFF / ON
Foot/DEF Automatic Blow Up Function	ON	Function to switch the blower level automatically when the defroster is ON.	OFF / ON
Foot Air Leak	ON	Function to cut off the airstream felt underfoot while the vehicle is moving.	OFF / ON
Ambient Temperature Shift	NORMAL	To control with the shifted ambient temperature against the display ambient temperature.	+3C / +2C / +1C / NORMAL / -1C / -2C / -3C

SECURITY

Theft deterrent system:

THEFT DETERRENT SYSTEM SPECIFICATIONS

Display (Item)	Default	Contents	Setting
Passive Mode	OFF	PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is removed from key slot and all doors is closed, even if doors are not locked by wireless or door key lock operation. In PASSIVE MODE, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see ENTRY DELAY below) after door is opened: Unlock any door by key or wireless operation Reconnect battery Insert key into key slot and turn power switch ON (IG)	ON / OFF
Warning by Horn)	ON	Function that allows vehicle horn and theft deterrent horn to be able to be used and a warning device	ON / OFF
Entry Delay Time	14 s	Function that changes entry delay time (time before warning states)	0 s/14 s/30 s
Warning by Glass Sensor	ON	Function that turns glass broken sensor ON/OFF	ON / OFF

LIGHTING SYSTEM

Illuminated entry

LIGHTING SYSTEM SPECIFICATIONS

Display (Item)	Default	Contents	Setting
Lighting Time	15 s	Changes lighting time after closing doors (light quickly fades out when power switch is turned ON (IG)	7.5 s/15 s/30 s
Battery Saver	ON	Illumination AUTO OFF ON function to turn off interior light automatically after specified time for prevent the battery loss when the interior light switch is "DOOR" position and the door is open	ON / OFF
I/L ON W/Unlock	ON	Function to light interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch	ON / OFF
I/L when ACC OFF	ON	Illuminates interior light when power switch is turned from the ON (ACC) to ON (IG) position	ON / OFF

Light control

LIGHT CONTROL SPECIFICATIONS

Display (Item)	Default	Contents	Setting
Sensitivity	NORMAL	To adjust sensitivity of lighting illumination. Refer to LIGHT CONTROL SPECIFICATIONS .	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex ON Sen	NORMAL	Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to LIGHT CONTROL SPECIFICATIONS .	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex OFF Sen	NORMAL	Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock. Refer to LIGHT CONTROL SPECIFICATIONS .	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
DRL Function (•)	ON	ON / OFF of DRL function	ON/OFF
•: w/ Daytime running light

Illustration of *1

LIGHT CONTROL SPECIFICATIONS

Brightness of lowering the lights	Dark ↔ Bright
Setting	DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

Illustration of *2

LIGHT CONTROL SPECIFICATIONS

Brightness when canceling the lowering of the lights	Dark ↔ Bright
Setting	DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

Illustration of *3

LIGHT CONTROL SPECIFICATIONS

Lighting brightness	Dark ↔ Bright
Setting	DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

WIRELESS DOOR LOCK CONTROL SYSTEM (with Smart Key System)

Wireless door lock control system:

WIRELESS DOOR LOCK CONTROL SYSTEM SPECIFICATIONS

Display (Items)	Default	Contents	Setting
Door Ajar Warning (Door ajar warning function)	ON	If door is not completely closed and transmitter LOCK switch is pressed, this function sounds buzzer for 10 seconds	ON / OFF
Wireless Buzzer Resp (Buzzer answer-back for wireless door lock operation)	ON	Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch is pressed	ON / OFF
Panic Function	ON	Function that operates theft deterrent alarm when transmitter PANIC switch transmitter is held 0.8 seconds.	ON / OFF
Wireless Auto Lock	ON	Function to control automatic re-locking of doors after unlocking with wireless door lock function.	ON / OFF
Unlock 2 Operation (Wireless unlock operated twice)	ON	Function that unlocks driver side door when UNLOCK switch on transmitter is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK switch once unlocks all doors.	ON / OFF
Auto Lock (Auto lock time)	30s	This function controls amount of time from unlocking doors to automatic re-locking function	30s / 60s
Hazard Answer Back (Hazard answer-back for wireless door lock operation)	ON	When LOCK switch on transmitter is pressed, this function illuminates all hazard warning lights once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice	ON / OFF

WIRELESS DOOR LOCK CONTROL SYSTEM (without Smart Key System)

Wireless door lock control system:

WIRELESS DOOR LOCK CONTROL SYSTEM SPECIFICATIONS

Display (Items)	Default	Contents	Setting
Open Door Warning (Door ajar warning function)	ON	If door is not completely closed and transmitter LOCK switch is pressed, this function sounds buzzer for 10 seconds	ON / OFF
Panic Function	ON	Function that operates theft deterrent alarm when transmitter PANIC switch is held 0.8 seconds.	ON / OFF
Wireless Auto Lock	ON	Function to control automatic re-locking of doors after unlocking with wireless door lock function.	ON / OFF
Unlock 2 Operation (Wireless unlock operated twice)	ON	Function that unlocks driver side door when UNLOCK switch on transmitter is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK switch once unlocks all doors.	ON / OFF
Auto Lock Time	30s	This function controls amount of time from unlocking doors to automatic re-locking function	30s / 60s
Hazard Answer Back (Hazard answer-back for wireless door lock operation)	ON	When LOCK switch on transmitter is pressed, this function illuminates all hazard warning lights once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice	ON / OFF

SMART KEY SYSTEM

Smart key system

SMART KEY SYSTEM SPECIFICATIONS

Tester Display	Default	Contents	Setting
Key Taken Warning (w/ P Range)	ON	Function that warns driver that key is taken out from driver's door when shift position is P and power switch is not OFF	ON / OFF
Key Taken Warning (w/o P Range)	ON	Function that warns driver that key is taken out from driver's door when shift position is not P and power switch is not OFF	ON / OFF
Passenger Take Key	ON	Function that warns driver that key is taken out from front passenger's door by passenger when power switch is not OFF	ON / OFF
Number of Warning Buzzer Sound	3 TIMES	Function that sets number of warning buzzer sounds when key is taken out of vehicle	OFF / 3TIMES / 5TIMES / 7TIMES
Lock Door in E/G Idling Buzzer	2s	Function that sets warning time for locking doors while engine is idling	OFF / 1s / 2s
Key Left in Vehicle Buzzer	2s	Function that sets warning time for locking doors while key is inside vehicle	OFF / 1s / 2s
Key Out Of Range	ON	Function that warns driver that entry ignition control is being attempted to be activated while key is out of detection range	ON / OFF
Key Low-Battery Warning	ON	Function that warns driver that key's battery power is low	ON / OFF
Door Unlock Mode	EACH	Function that makes entry unlock operation available.	ALL / EACH / D-door
Transmit Intval	0.3s	Function that sets entry signal transmission intervals when vehicle is stopped and key is outside vehicle	0.15s / 0.3s / 0.45s / 0.6s
Park Wait Time	3.0s	Function that sets waiting time to permit opening door after door is locked with entry lock function	0.5s / 1.5s / 2.5s / 5s
Back Door Opening Operation	LONG	Function that enables back door to open when key is inside luggage room	LONG / TWICE / OFF

METER / GAUGE SYSTEM

NOTE: Basically, these buzzers should be set on for safety driving. However, only if it is necessary to set the buzzer off for some reason, perform the following procedures.

PROCEDURES FOR SETTING BUZZERS TO OFF

Steps	Back-up Warning Buzzer	Driver's Seat Belt Buzzer	Front Passenger's Seat Belt Buzzer
1	Turn Power switch ON (IG)	Turn Power switch ON (IG)	Turn Power switch ON (IG)
2	Press ODO / Trip switch until odometer displays "ODO"	Press ODO / Trip switch until odometer displays "ODO"	Press ODO / Trip switch until odometer displays "ODO"
3	Turn power switch OFF	Turn power switch OFF	Turn power switch OFF
4	Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY"	Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY"	Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY"
5	After turning power switch ON (IG), press ODO / TRIP switch within 6 seconds, and hold it down for 10 seconds or more.	After turning power switch ON (IG), press ODO / TRIP switch within 6 seconds, and hold it down for 10 seconds or more.	Sit in front passenger seat. After turning power switch ON (IG), press ODO / TRIP switch within 6 seconds, and hold it down for 10 seconds or more.
6	Continue holding down ODO / TRIP switch, move shift lever to R and press P switch	Continue holding down ODO / TRIP switch, fasten driver seat belt	Continue holding down ODO / TRIP switch, fasten front passenger seat belt
7	Check that odometer displays either "b-on" or "b-off"*	Check that odometer displays either "b-on" or "b-off"*	Check that odometer displays either "b-on" or "b-off"*
8	Press ODO / TRIP switch change display to "b-off"	Press ODO / TRIP switch change display to "b-off"	Press ODO / TRIP switch change display to "b-off"
9	Turn power switch OFF	Turn power switch OFF	Turn power switch OFF
10	Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY"	Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY"	Turn power switch ON (IG) while depressing brake pedal. Check that combination meter displays "READY"
11	Check that no buzzer sounds when shift lever is in "R"	Check that no buzzer sounds	Check that no buzzer sounds when sitting on front passenger seat

HINT:

*: "b-off" indicates that the buzzer is OFF. "b-on indicates that the buzzer is ON. The buzzer cancel setting will be finished (the odometer will display "ODO") if the ODO / TRIP switch is not operated for 10 seconds or more. In this case, perform step 11 to check that buzzer cancel setting is complete. If it is not complete, start from step 1 again.

NOTE: When either the battery cable or the combination meter connector is disconnected, these buzzers are set on.