Transmission Assembly: Remove, Install, and Overhaul

Includes: R&I Transaxle Assembly, inspect and replace necessary Transmission components and road test.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
1.8L Eng	Includes: R&I Subframe. DOES NOT include wheel alignment. Includes: Bleed Clutch System. Includes: R&I Engine and Transmission Assembly.	16.5		A
Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace:
		0.3		C
Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace:
		0.2		C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear		0.7		B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.5		C