Check For Intermittent Problems

HINT: 

Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the Techstream when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.

1. Clear DTCs. Refer to DTC CHECK / CLEAR .
2. Switch the ECM from normal mode to check mode using the Techstream. Refer to CHECK MODE PROCEDURE .
3. Perform a simulation test. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
4. Check and wiggle the harness(es), connector(s) and terminal(s). Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE .