Transaxle Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Highlander Base, 2.7L Eng VIN A, which is a different variant/trim than selected.
Includes: Inspect and replace all necessary Transmission and Differential components and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Base,SE,In-Line4 | Includes: R&I Engine and Transmission Assembly. DOES NOT include wheel alignment. | 22.2 | 15.7 | A |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Base,Limited,SE, Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Base,Limited,SE | 0.2 | C | ||
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| Base,Limited,SE | 0.5 | C | ||