Seat Belt Control Ecu: Removal: Removal

REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) . Refer to REMOVAL - Step 1
REMOVE REAR DECK FLOOR BOX . Refer to REMOVAL - Step 2
REMOVE REAR NO. 3 FLOOR BOARD . Refer to REMOVAL - Step 3
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY . Refer to REMOVAL - Step 22
REMOVE ECU INTEGRATION BOX RH
1. Remove the bolt and 2 nuts.
  
  Fig 1: Locating ECU Integration Box Nuts And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect each connector and remove the ECU integration box RH.
REMOVE SEAT BELT CONTROL ECU
1. Disengage the 2 claws and remove the seat belt control ECU.
  
  Fig 2: Locating Seat Belt Control ECU Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002