Ignition Coil And Spark Plug: Installation: Installation

INSTALL SPARK PLUG
1. Using a 14 mm spark plug wrench, install the 4 spark plugs.
  
  Fig 1: Identifying Spark Plug Wrench & Spark Plugs
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
INSTALL IGNITION COIL ASSEMBLY
1. Install the 4 ignition coils with the 4 bolts.
  
  Fig 2: Identifying Ignition Coil Connectors & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE:
  When installing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.
2. Connect the 4 ignition coil connectors.
INSTALL NO. 2 CYLINDER HEAD COVER . Refer to INSTALLATION - Step 97
INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY . Refer to INSTALLATION - Step 16
INSTALL COWL BODY MOUNTING REINFORCEMENT LH . Refer to INSTALLATION - Step 17
INSTALL WINDSHIELD WIPER MOTOR AND LINK
1. Remove the windshield wiper motor and link. Refer to INSTALLATION .