CAMSHAFT POSITION SENSOR (for Sedan): Inspection: Inspection

INSPECT CAMSHAFT POSITION SENSOR

Fig 1: Identifying Resistance Between Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance

Temperature	Specified Condition
Cold	1, 630 to 2, 740 Ω
Hot	2, 065 to 3, 225 Ω

HINT:

In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50 °C (14 to 122 °F). Hot means approximately 50 to 100 °C (122 to 212 °F).

If the resistance is not as specified, replace the camshaft position sensor.