LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Three >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) (Except Plug-In) >> Knock Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Removal: Removal

  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer to REMOVAL .
  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
    2. Remove the bolt and remove the knock sensor.
      Fig 1: Identifying Knock Sensor, Connector & Bolt
      GTY227208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals