Customize Parameters

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

POWER DOOR LOCK CONTROL SYSTEM

Customizing with the Techstream

DOOR LOCK

Display	Default	Content	Setting
Unlock Key Twice	ON	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	ON or OFF
Auto Lock	ON1 OFF2	Function that locks all doors when the vehicle speed reaches a certain level.	ON or OFF
Auto Lock/Shift	ON2 OFF1	Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed.	ON or OFF
Auto Unlock/Shift	ON	Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY).	ON or OFF
All Unlock/Open-Close	OFF	Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off.	ON or OFF

*1: for Korea
*2: except Korea

ILLUMINATED ENTRY

Display	Default	Content	Setting
Lighting Time	15 s	Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or (IG))	7.5 s, 15 s or 30 s

Customizing with the Multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Settings / Door Lock Settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Unlock on Second Key Turn	On	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	On or Off	Main body ECU (Multiplex network body ECU)
Auto Lock by Speed	On1 Off2	Function that locks all doors when the vehicle speed reaches a certain level.	On or Off	Main body ECU (Multiplex network body ECU)
Auto Lock by Shift from P	On2 Off1	Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed.	On or Off	Main body ECU (Multiplex network body ECU)
Auto Unlock by Shift to P	On	Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY).	On or Off	Main body ECU (Multiplex network body ECU)
Auto Unlock by Driver Door	Off	Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off.	On or Off	Main body ECU (Multiplex network body ECU)

*1: for Korea
*2: except Korea

Customizing with the Multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Speed Sensitive Auto Lock	Off	Function that locks all doors when the vehicle speed reaches a certain level.	On or Off	Main body ECU (Multiplex network body ECU)
Shift-Linked Auto Lock	On	Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed.	On or Off	Main body ECU (Multiplex network body ECU)
Shift-Linked Auto Unlock	On	Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY).	On or Off	Main body ECU (Multiplex network body ECU)

WIRELESS DOOR LOCK CONTROL SYSTEM

Customizing with the Techstream

WIRELESS DOOR LOCK CONTROL SYSTEM

Display (item)	Default	Function	Setting
Wireless Control	ON	Function that turns wireless door lock function on or off	ON or OFF
Hazard Answer Back	ON	When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice.	ON or OFF
Open Door Warning	ON	The buzzer sounds when lock is pressed when any of the doors are ajar.	ON or OFF
Unlock 2 Operation	ON	Function that unlocks driver door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.	ON or OFF
Panic Function	ON	Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds	ON or OFF
Auto Lock Time	60 s1 or 30 s2	Function that regulates the interval between unlocking and automatic relocking of doors	30 s, 60 s or 120 s
Wireless Auto Lock	ON	This function turns the wireless auto lock function on or off.	ON or OFF
Wireless Buzzer Resp	ON	Wireless door lock buzzer response	ON or OFF
Wireless Buzzer Vol	Level7	Wireless door lock buzzer volume	Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0

*1: except for Korea
*2: for Korea

ILLUMINATED ENTRY

Display	Default	Content	Setting
Lighting Time	15 s	Changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC or IG).)	7.5 s, 15 s or 30 s

Customizing with the Multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Remote 2-Press Unlock	On	Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock.	On or Off	Main body ECU (Multiplex network body ECU)
Auto Relock Timer	60 s1 30 s2	Function that regulates the interval between unlocking and automatic relocking of doors	30 s, 60 s or 120 s	Main body ECU (Multiplex network body ECU)
Lock/Unlock Feedback-Lights	On	When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice.	On or Off	Main body ECU (Multiplex network body ECU)
Lock/Unlock Feedback-Tone	7	Wireless door lock buzzer volume	Off, 1, 2, 3, 4, 5, 6 or 7	Main body ECU (Multiplex network body ECU)

*1: except Korea
*2: for Korea

Customizing with the Multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Remote 2-Press Unlock	On	Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock.	On or Off	Main body ECU (Multiplex network body ECU)
Lock Feedback Volume	7	Wireless door lock buzzer volume	Off, 1, 2, 3, 4, 5, 6 or 7	Main body ECU (Multiplex network body ECU)

SMART KEY SYSTEM (for Entry Function)

Customizing with the Techstream

SMART KEY / ACCESS

Tester Display	Default	Content	Setting
Park Wait Time	2.5 s	Function that sets waiting time to permit opening door after door is locked with entry lock function	0.5 s, 1.5 s, 2.5 s or 5 s
Ignition Available Area	All	Function that switches the entry hybrid vehicle control system start detection area	Front or All*1
Back Door Opening Operation*2	Long	Function that opens the back door when the driver has the key and presses back door opener switch assembly (opener switch)	Long, Twice or OFF
Door Unlock Mode2, 3	Driver	Function that chooses the doors to be operated by entry unlock operation	All or Driver
Touch Activation Over Threshold	Active	The function that limits the consecutive entry lock operation to only 2 times can be changed between Active and Not Active. When in Not Active mode, there is no limit for the number of times that the consecutive entry lock operation can be performed.	Active or Not Active

*1: Weak radio waves will still be emitted from oscillators other than the front oscillator even when the "Front" customize setting is selected.
*2: w/ Entry System Back Door Open Function
*3: except for Korea and Mexico

WARNING

Tester Display	Default	Content	Setting
Key Low Battery Warning	ON	Function that warns driver that the key battery is weak	ON or OFF

Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Setting.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Select Doors to Unlock	Driver's Door	Function that sets which doors are unlocked by the entry unlock function.	All Doors or Driver's Door	Certification ECU (smart key ECU assembly)
Key System with Elec. Key1 Entry and Start System2	On	Function that enables or disables the smart key system.	On or Off	Certification ECU (smart key ECU assembly)

*1: except Korea
*2: for Korea

Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Key System with Elec. Key1 Entry and Start System2	On	Function that enables or disables the smart key system.	On or Off	Certification ECU (smart key ECU assembly)

*1: except Korea
*2: for Korea

ENTRY UNLOCK MODE SWITCHING* (SMART KEY SYSTEM (for Entry Function))

*: except for Korea and Mexico

Check that the power source mode is OFF and the LED on the key is not blinking. Press the LOCK button and one of the other buttons on the key at the same time for approximately 5 seconds while the key is in the actuation area.
Driver door unlock default setting:

When the switches are pressed and held for 5 seconds, the entry door unlock mode changes to the mode that is not currently selected.

NOTE:
After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.
- Driver door unlock mode:
  When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.*
  
  *: w/ Entry System Back Door Open Function
- All door unlock mode:
  When any touch sensor is touched, all doors unlock.
The certification ECU (smart key ECU assembly) receives this signal from the door control receiver assembly and changes the smart key system to entry unlock mode.

The certification ECU (smart key ECU assembly) sounds the buzzers of the wireless door lock buzzer assembly.

Mode	Wireless Door Lock Buzzer Assembly
Driver Door (Default)	Sounds 3 times
All Doors (Customized)	Sounds 2 times

HINT:

The procedure only changes entry unlock mode of the smart key system. It does not switch the unlocking of the wireless door lock control.

ELECTRICAL KEY CANCEL (SMART KEY SYSTEM (for Entry Function))
The electrical key cancel operation disables the following functions:
- Entry Unlock/Lock
- Entry Hybrid Vehicle Control System Start
- Entry System Back Door Open Function*
  *: w/ Entry System Back Door Open Function
- Electrical Key Lock-in Prevention
- Warning
1. The operation procedure is as follows:
  Precondition:
  
  Power switch off, driver door closed and unlocked.
  1. Push the unlock switch of the key once.
  2. Open the driver door within 5 seconds.
  3. Push the unlock switch of the key twice within 5 seconds.
  4. Close and open the driver door twice within 30 seconds.
    (Driver door: Close → Open → Close → Open)
  5. Push the unlock switch of the key twice within 5 seconds.
  6. Close and open the driver door within 30 seconds.
    (Driver door: Close → Open)
  7. Close the driver door within 5 seconds.
    When electrical key cancel is activated, the wireless door lock buzzer sounds twice.
    
    To return to the original condition, perform the procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.

SMART KEY SYSTEM (for Start Function)

Customizing with the Techstream

SMART KEY / ACCESS

Tester Display	Default	Content	Setting
Ignition Available Area (Entry ignition available area)	All	Function to choose the available area for electrical key to start the hybrid control system.	Front or All*

*: Weak radio waves will still be emitted from oscillators other than the front oscillator even when the "Front" customize setting is selected.

Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Setting.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Key System with Elec. Key1 Entry and Start System2	On	Function that enables or disables the smart key system.	On or Off	Certification ECU (smart key ECU assembly)

*1: except Korea
*2: for Korea

Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Key System with Elec. Key1 Entry and Start System2	On	Function that enables or disables the smart key system.	On or Off	Certification ECU (smart key ECU assembly)

*1: except Korea
*2: for Korea

CUSTOMIZING FUNCTION WITHOUT TECHSTREAM (SMART KEY SYSTEM (for Start Function))
Performing the following procedure disables the smart key system.

HINT:

To start the hybrid control system while the smart key system is disabled, follow the procedure for when the key battery is low. Refer to SYSTEM DESCRIPTION .
1. The operation procedure is as follows:
  Precondition:
  
  Power switch off, driver door closed and unlocked.
  1. Push the unlock switch of the key once.
  2. Open the driver door within 5 seconds.
  3. Push the unlock switch of the key twice within 5 seconds.
  4. Close and open the driver door twice within 30 seconds.
    (Driver door: Close → Open → Close → Open)
  5. Push the unlock switch of the key twice within 5 seconds.
  6. Close and open the driver door within 30 seconds.
    (Driver door: Close → Open)
  7. Close the driver door within 5 seconds.
    When electrical key cancel is activated, the wireless door lock buzzer sounds twice.
    
    To return to the original condition, perform the procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.

LIGHTING SYSTEM (LIGHTING INT)

Customizing with the Techstream

ILLUMINATED ENTRY

Tester Display	Default	Content	Setting	Relevant ECU
Lighting Time	15 s	Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC or IG).)	7.5 s, 15 s or 30 s	Main body ECU (Multiplex network body ECU)
I/L when ACC OFF	ON	Lights up power switch illumination, front interior lights, rear interior light and footwell lights when the power switch is turned from on (ACC or IG) to off.	ON or OFF
I/L ON W/Door Key Unlock	ON	Lights up power switch illumination, front interior lights, rear interior light and footwell lights when doors are unlocked using a mechanical key or door control transmitter.	ON or OFF
Light Control	ON	Dims (ON setting) or turns off (OFF setting) the footwell lights under the following conditions: Power switch on (IG), shift lever not in P, and all doors closed.	ON or OFF
Room Light when Aprchd	ON	Lights up the power switch illumination, front interior lights, rear interior light and footwell lights when a key enters any actuation area around the doors.	ON or OFF
Inside Foot Light	ON	ON/OFF of footwell light control function.	ON or OFF

Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: Setup / Vehicle / Vehicle Customization / Light Settings.

Select the setting by referring to the table below.

LIGHT SETTINGS

Display	Default	Content	Setting	Relevant ECU
Interior Lights Off Timer	15 sec.	Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC or IG).)	Off, 7.5 sec., 15 sec., or 30 sec.	Main body ECU (Multiplex network body ECU)

METER / GAUGE SYSTEM

WARNING

Tester Display	Default	Content	Setting
Key Remind Sound	Slow	Function to change the cycle of the key reminder buzzer	Normal, Fast or Slow
Driver Side Seatbelt Warning Buzzer*1	ON	Function to turn on/off the seat belt warning buzzer	ON or OFF
Front Passenger Side Seatbelt Warning Buzzer*1	ON	Function to turn on/off the seat belt warning buzzer	ON or OFF
Rear Seatbelt Warning Buzzer*2	ON	Function to turn on/off the rear seat belt warning buzzer	ON or OFF
Reverse Buzzer	Continual	Function to change the type of the reverse warning buzzer	Single or Continual

*1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.
*2: w/ Rear Seat Belt Warning

SEAT BELT WARNING SYSTEM

COMBINATION METER

Tester Display	Default	Content	Setting
Driver Side Seatbelt Warning Buzzer	ON	Function to sound the seat belt warning buzzer	ON / OFF
Front Passenger Side Seatbelt Warning Buzzer	ON	Function to sound the seat belt warning buzzer	ON / OFF

HINT:

This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.

AIR CONDITIONING SYSTEM

Customizing with the Techstream

AIR CONDITIONER

Display (Item)	Default	Content	Setting
Set Temperature Shift	Normal	Function to control with the shifted temperature against the displayed temperature.	-2C, -1C, Normal, +1C, +2C
Compressor Mode*3	Automatic	Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off.	Manual or Automatic
Air inlet Mode*2	Automatic	In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode	Manual or Automatic
Foot/DEF Auto Mode	ON	Function to automatically turn the airflow from FOOT/DEF on when AUTO mode is on.	ON or OFF
Foot/DEF Automatic Blow Up Function	ON	Function to automatically increase the blower level when the defroster is on.	ON or OFF
Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature.	-3C, -2C, -1C, Normal, +1C, +2C, +3C
ECO MODE Cancel	OFF	Function to cancel the ECO mode drive when item is on.	OFF or ON
Noise and Vibration Reduction	OFF	Function to change speed of the compressor when item is on.	OFF or ON
Start Pre A/C*1	Long1	Function to set the activation operation method for the remote air conditioning system using the key (electrical transmitter).	1 tim ON, 2 tim ON, Long1 or Long2
Stop Pre A/C*1	2 tim ON	Function to set the stop operation method for the remote air conditioning system using the key (electrical transmitter).	1 tim ON, 2 tim ON, Long1 or Long2

*1: w/ Remote Air Conditioning System
*2: for Korea and Mexico
*3: except Korea and Mexico

Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type)

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Settings / Climate Settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Auto A/C Mode*2	On	Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off	On or Off	Air conditioning amplifier assembly
Efficient Ventilation Mode*1	On	In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode	On or Off	Air conditioning amplifier assembly

*1: for Korea
*2: except Korea

POWER WINDOW CONTROL SYSTEM

POWER WINDOW

Tester Display	Default	Content	Setting	Relevant ECU
P Window Auto Up	Avail	This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger door).	Not Avl/Avail	Power window ECU (Power window regulator motor assembly)
P Window Auto Up From Driver	Avail	This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly.	Not Avl/Avail	Power window ECU (Power window regulator motor assembly)
RR Window Auto Up	Avail	This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear RH door).	Not Avl/Avail	Power window ECU (Power window regulator motor assembly)
RR Window Auto Up From Driver	Avail	This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly.	Not Avl/Avail	Power window ECU (Power window regulator motor assembly)
RL Window Auto Up	Avail	This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear LH door).	Not Avl/Avail	Power window ECU (Power window regulator motor assembly)
RL Window Auto Up From Driver	Avail	This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly.	Not Avl/Avail	Power window ECU (Power window regulator motor assembly)

LIGHTING SYSTEM (LIGHTING EXT)

Customizing with the Techstream

LIGHT CONTROL

Display	Default	Content	Setting	Relevant ECU
Disp Ex ON Sen	Normal	Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A	Light2, Light1, Normal, Dark1 or Dark2	Main Body ECU (Multiplex Network Body ECU)
Disp Ex OFF Sen	Normal	Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B	Light2, Light1, Normal, Dark1 or Dark2
Light Auto OFF Delay	30 s	Keeps the headlights on for a certain period of time after turning the power switch off and closing all the doors with the low beam headlights on.	Off, 30 s, 60 s or 90 s
Response Time*1	0.1 s	Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position	0.1 s or 1.0 s
Sensitivity	Normal	Adjusts the sensitivity of the automatic light control system.*C	Light2, Light1, Normal, Dark1 or Dark2
DRL Function*2	ON	ON/OFF of the DRL function	ON or OFF

*1: w/o DRL
*2: Headlight dimmer switch with DRL OFF

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

Brightness level required to dim the lights	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

Brightness level required to cancel the dimming of the lights	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

Sensitivity of the automatic light control system	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	Dark2	Dark1	Normal	Light1	Light2

Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings.

Select the setting by referring to the table below.

LIGHT SETTINGS

Display	Default	Content	Setting	Relevant ECU
Headlamps-On Sensitivity	0	Adjusts the sensitivity of the automatic light control system.*A	-2, -1, 0, +1 or +2	Main Body ECU (Multiplex Network Body ECU)
Headlamps Auto-Off Timer	30 sec.	Keeps the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on.	Off, 30 sec., 60 sec. or 90 sec.
Daytime Running Lights*1	On	ON/OFF of the DRL function	On or Off

*1: Headlight dimmer switch with DRL OFF function.

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

Sensitivity of the automatic light control system	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	-2	-1	0	+1	+2

Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle.

Select the setting by referring to the table below.

VEHICLE SETTINGS

Display	Default	Content	Setting	Relevant ECU
Light Sensor Sensitivity	0	Adjusts the sensitivity of the automatic light control system.*A	-2, -1, 0, +1 or +2	Main Body ECU (Multiplex Network Body ECU)
Headlight Off Time Adjust	30 sec.	Keeps the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on.	Off, 30 sec., 60 sec. or 90 sec.
Daytime Running Lights*1	On	ON/OFF of the DRL function	On or Off

*1: Headlight dimmer switch with DRL OFF function.

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

Sensitivity of the automatic light control system	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	-2	-1	0	+1	+2