Pre-Collision System
PRE-COLLISION SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC Code | Description |
|---|---|
| C1A47 | Steering Angle Sensor |
| C1A48 | G Sensor |
| C1A4B | Stop Light Relay Circuit |
| C1A50 | Brake System Malfunction |
| C1A62 | Brake Control Signal Malfunction |
| C1A63 | Other System Malfunction |
| C1AA0 | Front Camera Module Circuit |
| C1AA3 | Vehicle Speed Sensor Circuit |
| C1AA4 | Yaw Rate Sensor Circuit |
| C1AA5 | Yaw Rate Sensor Power Supply Voltage Circuit |
| C1AA7 | Skid Control Buzzer Circuit |
| C1AA8 | Front Camera Module Incorrect Axial Gap |
| C1AA9 | Front Camera Module Beam Axis Not Adjusted |
| C1AAA | FCM Destination Information Uninitialized |
| C1AAF | Heater Activation Relay Open |
| U0100 | Lost Communication with ECM / PCM "A" |
| U0123 | Lost Communication with Yaw Rate Sensor Module |
| U0126 | Lost Communication with Steering Angle Sensor Module |
| U0129 | Lost Communication with Brake System Control Module |
| U0155 | Lost Communication with Combination Meter |
| U023A | Lost Communication with Front Camera Module |