LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Prius C Two >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostics - Introduction >> Pre-Collision System >> Customize Parameters [11/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [11/2015 - ]: Procedure

  1. CUSTOMIZE PRE-COLLISION SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Record the current settings before customizing.

    HINT: 

    The following items can be customized.

    1. Customizing with the Techstream.
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Sensor.
      5. Select the setting by referring to the table below.
        SENSOR

        Tester Display Description Default Setting ECU
        PCS Operation State Retention Setting Refer to the table below OFF 0:OFF, 1:ON Pre-collision city sensor
        PCS Alarm Activation Distance Retention Setting 1 Refer to the table below OFF 0:OFF, 1:ON Pre-collision city sensor
        PCS Alarm Activation Distance Retention Setting 2 Refer to the table below ON 0:OFF, 1:ON Pre-collision city sensor
        PCS Alarm Activation Distance Retention Setting 3 Refer to the table below OFF 0:OFF, 1:ON Pre-collision city sensor
        Customize Setting Description Setting
        PCS Operation State Retention Setting Function to maintain the pre-collision system on/off setting when the power switch is turned off and then on (IG). OFF: Not maintained (Pre-collision system always turns on)
        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 1 Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on. OFF: Not maintained (Setting changes to "Mid")
        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 2 Function to maintain the sensitivity setting of the pre-collision system when the power switch is turned off while the pre-collision system is on. OFF: Not maintained (Setting changes to "Mid")
        ON: Maintained
        PCS Alarm Activation Distance Retention Setting 3 Function to maintain the sensitivity setting of the pre-collision system when the power switch is turned off while the pre-collision system is off. OFF: Not maintained (Setting changes to "Mid")
        ON: Maintained
scientia non olet · About LEMON Manuals