Removal & Installation
WARNING: This page is about the Sienna L, Van Cargo, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| FWD, w/Engine Removal | Includes: R&I Engine and Transmission Assembly with Front Suspension. Includes: Recover, Evacuate and Recharge Air Conditioning System. DOES NOT include wheel alignment. | 11.2 | C | |
| FWD, w/o Engine Removal | Includes: R&I Subframe. Includes: Recover, Evacuate and Recharge Air Conditioning System. DOES NOT include wheel alignment. | 10.9 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: OUTPUT SEAL: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Includes: Initialization. | 0.8 | C | ||
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| 0.5 | C | |||