Removal & Installation
WARNING: This page is about the Tacoma SR, 4D Pickup Crew Cab, 2.7L Eng VIN X, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Automatic Trans,In-Line4,RWD | Includes: Confirm Fluid temperature for level check. | 4.6 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| Automatic Trans | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Automatic Trans, Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Automatic Trans | 0.2 | C | ||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| Automatic Trans | 0.2 | B | ||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| Automatic Trans | 0.6 | B | ||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Automatic Trans | 0.4 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| Automatic Trans | 0.1 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Automatic Trans,RWD | Includes: Initialization. Includes: R&I Transfer Case Assembly. | 0.6 | C | |
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| Automatic Trans | 0.5 | C | ||