Freeze Frame Data [09/2016 - ]

HINT: 

The electric vehicle charger assembly records vehicle and charging condition information as freeze frame data the moment a DTC is stored. It can be used for estimating or duplicating the vehicle conditions that were present when the malfunction occurred.

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Plug-in Control / Trouble Codes.

   Powertrain > Plug-in Control > Trouble Codes 

5. Select a DTC in order to display its freeze frame data.
6. Check the freeze frame information recorded with the DTC.

   Powertrain > Plug-in Control 

   Tester Display	Measurement Item	Range
   Vehicle Speed	Vehicle speed	Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph)
   Engine Speed	Engine speed	-
   Calculate Load	Calculate load	Min.: 0.0%, Max.: 100.0%
   Coolant Temperature	Engine coolant temperature	Min.: -40°C (-40°F), Max.: 215°C (419°F)
   Engine Run Time	Elapsed time after starting engine	Min.: 0 sec, Max.: 65535 sec
   Throttle Position Sensor No. 1 Voltage %	Accelerator pedal position sensor No. 1	Min.: 0.00%, Max.: 100.00%
   Smoothed Value of BATT Voltage	Smoothed value of auxiliary battery voltage	Min.: 0.000 V, Max.: 65.535 V
   Warmup Cycle Cleared DTC	The number of times the engine is warmed up after clearing DTCs	Min.: 0, Max.: 255
   Distance from DTC Cleared	Drive distance after clearing DTCs	Min.: 0 km (0 mile), Max.: 65535 km (40723 mile)
   Time after DTC Cleared	Elapsed time after clearing DTCs	Min.: 0 min, Max.: 65535 min
   Running Time from MIL ON	Running time from MIL on	Min.: 0 min, Max.: 65535 min
   Total Distance Traveled	Drive total distance	Min.: 0, Max.: 16777215
   Total Distance Traveled - Unit	Drive total distance unit	km or mile
   MIL ON Run Distance	Drive distance from MIL on	Min.: 0 km (0 mile), Max.: 65535 km (40723 mile)
   IGB Signal Status	Charging system power source IGB signal state during plug-in charging (AC)	ON or OFF
   IGCT Signal Status	IGCT signal status	ON or OFF
   HV/EV Battery Total Voltage	Total voltage of all HV battery stacks	Min.: 0.0 V, Max.: 32767.5 V
   Charging Voltage for Hybrid/EV Battery	HV battery charging voltage (VCHG value)	Min.: 0.0 V, Max.: 6553.5 V
   Hybrid/EV Battery SOC Indicator 1 Status	SOC indicator (indicator light assembly) (1st indicator) state	ON or OFF
   Hybrid/EV Battery SOC Indicator 2 Status	SOC indicator (indicator light assembly) (2nd indicator) state	ON or OFF
   Hybrid/EV Battery SOC Indicator 3 Status	SOC indicator (indicator light assembly) (3rd indicator) state	ON or OFF
   Number of Auxiliary Battery Voltage Low during Charging	Cumulative auxiliary battery voltage drops during plug-in charging	Min.: 0, Max.: 255
   Charging Lid Switch Status	Charging lid switch status	ON or OFF
   Charging Lid Lock Pin Request Status	Charging port lid lock unlock request signal	Unlock or Lock
   Charging Lid Lamp Status	Charging lid light status	OFF / Fade Out / ON
   Charging Indicator lighting Request	Charging indicator (EV charger lid indicator assembly) illumination request	ON or OFF
   Charging Connector Connect Status	Charging connector connect status	ON or OFF
   Charging Connector Connect Status Voltage	PISW terminal voltage used for checking electric vehicle charger cable assembly connection condition	Min.: 0.00 V, Max.: 79.99 V
   Charging Connector Lock Switch Status	Charging connector lock switch status	ON or OFF
   Charging Connector Lock Pin Status	Charging connector lock pin status	Unlock or Lock
   Charging Connector Lock Motor Unlock Direction Revolution Request Current	Output of current to operate charging connector lock motor in reverse	ON or OFF
   Charging Connector Lock Motor Lock Direction Revolution Request Current	Output of current to operate charging connector lock motor forward	ON or OFF
   Charger Power Supply Voltage Type	Plug-in charging power source voltage	None / 100V Series / 200V Series
   Charger Operation Status	Charging operation state	Stand by / Ready / Stop
   Charger Operation Request	Charging operation request state	ON or OFF
   Charger Input Power	Power input to electric vehicle charger assembly from inlet AC charger cable (charging inlet)	Min.: 0 W, Max.: 327675 W
   Charger Output Power	Power output from electric vehicle charger assembly	Min.: 0 W, Max.: 327675 W
   Charger Cooling Fan Drive Request	Charger cooling blower operation request	ON or OFF
   Charger Cooling Fan Driving Duty	Charger cooling blower operation duty ratio	Min.: 0%, Max.: 100%
   Charger Cooling Fan Revolution	Charger cooling blower speed	Min.: 0 rpm, Max.: 65535 rpm
   Charging System Starting Request from DC Quick Charging Control	-	-
   Charging Permission from Hybrid/EV Control ECU	Charger operation permission signal (CHEN)	NG or OK
   Charging Permission Continuation Status from Hybrid/EV Control ECU	Charger operation permission signal (CHEN)	NG or OK
   Charging Permission Continuation Status Reset Request from Hybrid/EV Control ECU	Reset command while charger operation permission signal (CHEN) being received	ON or OFF
   Total Number of AC Charging	Cumulative plug-in charging operations	Min.: 0, Max.: 65535
   AC Charging Total Time	Cumulative plug-in charging time	Min.: 0 min, Max.: 2147483647 min
   Target Charging Power	Charging power target value	Min.: -327.68 kW, Max.: 327.67 kW
   Target Charging Power from Charger	Charging power target value output from electric vehicle charger assembly	Min.: 0 W, Max.: 327675 W
   Charging Required Time Calculation Status	Charging time required calculation complete/incomplete flag	Incomplete or Complete
   Charging Required Time	Calculated charging time required to complete charging	Min.: 0 min, Max.: 65535 min
   Charging Elapsed Time	Time elapsed since plug-in charging started	Min.: 0 sec, Max.: 65535 sec
   AC Input Voltage for Monitoring	Effective AC voltage input to electric vehicle charger assembly from inlet AC charger cable (charging inlet)	Min.: 0.0 V, Max.: 32767.5 V
   AC Input Voltage for Control	Effective AC voltage input to electric vehicle charger assembly from inlet AC charger cable (charging inlet)	Min.: -65536 V, Max.: 65534 V
   AC Input Voltage Instantaneous Value 1 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 1	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 2 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 2	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 3 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 3	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 4 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 4	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 5 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 5	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 6 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 6	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 7 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 7	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 8 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 8	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 9 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 9	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 10 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 10	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 11 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 11	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 12 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 12	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 13 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 13	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 14 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 14	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 15 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 15	Min.: -512 V, Max.: 508 V
   AC Input Voltage Instantaneous Value 16 for Waveform Monitoring	VIN sensor waveform voltage (instantaneous value) 16	Min.: -512 V, Max.: 508 V
   Time Cycle of Charging Voltage Zero Crossing Point	AC input voltage zero cross cycle	Min.: 0 ms, Max.: 255 ms
   Plug-in Control ECU Voltage (+B)	Electric vehicle charger assembly internal voltage (+B)	Min.: 0.00 V, Max.: 79.99 V
   Plug-in Control ECU Voltage (SMP5)	Internal power source voltage (SMP5)	Min.: 0.00 V, Max.: 79.99 V
   Plug-in Control ECU Voltage (VOMS5)	Internal power source voltage (VOMS5)	Min.: 0.00 V, Max.: 79.99 V
   Plug-in Control ECU Voltage (VOM5)	Internal power source voltage (VOM5)	Min.: 0.00 V, Max.: 79.99 V
   Plug-in Control ECU Voltage (VOMC5)	Internal power source voltage (VOMC5)	Min.: 0.00 V, Max.: 79.99 V
   Plug-in Control ECU System Voltage (Plus)	Internal power source voltage	Min.: 0.0 V, Max.: 25.5 V
   Plug-in Control ECU System Voltage (Offset)	Internal power source voltage	Min.: 0.00 V, Max.: 4.98 V
   Plug-in Control ECU System Voltage (Minus)	Internal power source voltage	Min.: -20.00 V, Max.: 19.84 V
   AC Input Current	Effective input alternating current (IAC)	Min.: 0.0 A, Max.: 25.5 A
   Charging Current Upper Limit	Maximum supply current	Min.: -327.68 A, Max.: 327.67 A
   Charging Current Duty from Charger	Duty value of CPLT signal generated at the electric vehicle charger cable assembly side (including EVSE (charging station))	Min.: 0%, Max.: 100%
   Time Cycle of Charging Current Duty from Charger	Duration of 1 cycle of CPLT	Min.: 0 us, Max.: 65535 us
   Charging Current Limit Status from Charger	Existence of charging current restriction	ON or OFF
   Charging Power Output Limit from Charger	Electric vehicle charger assembly output power limit	ON or OFF
   Charging Power Limit (Charging Voltage Low)	Charging power limit (throttling control)	ON or OFF
   Timer Charging Switch Status	Charging timer switch status	ON or OFF
   Timer Charging Reserve Cancel Request	Charge schedule cancel request for remote air conditioning operation to start plug-in charging	ON or OFF
   PFC Boosting Circuit Driver Drive Status	PFC booster circuit drive control operation state	ON or OFF
   Target PFC Boosting Circuit Boosted Voltage	PFC booster circuit target boosted voltage value	Min.: 0 V, Max.: 510 V
   Voltage after Boosting by PFC Boosting Circuit	Voltage after boosting by PFC boosting circuit	Min.: 0 V, Max.: 510 V
   Current after Boosting by PFC Boosting Circuit	Current after boosting by PFC boosting circuit	Min.: -64.0 A, Max.: 63.5 A
   PFC Boosting Circuit Current Amplitude	PFC booster circuit maximum current	Min.: -64.0 A, Max.: 63.5 A
   PFC Boosting Circuit Temperature	PFC booster circuit temperature	Min.: -40°C (-40°F), Max.: 215°C (419°F)
   PFC Boosting Circuit Output Limit Status (Over Temperature)	Power save state due to PFC booster circuit temperature	ON or OFF
   DC/DC Converter Driver Drive Status (for Charging)	DC/DC converter (for charging HV battery) drive control operating state	ON or OFF
   DC/DC Converter Control Mode (for Charging)	DC/DC converter (for charging HV battery) control state	Consecutive Mode or Not Consecutive Mode
   Target DC/DC Converter Current (for Charging)	DC/DC converter (for charging HV battery) target current value	Min.: -64.0 A, Max.: 63.5 A
   DC/DC Converter Temperature (for Charging)	DC/DC converter (for charging HV battery) temperature	Min.: -40°C (-40°F), Max.: 215°C (419°F)
   DC/DC Converter Output Limit Status (for Charging) (Over Temperature)	Power save state due to DC/DC converter (for charging HV battery) temperature	ON or OFF
   Sub DC/DC Converter Operation Status (for Charging)	DC/DC converter (for charging auxiliary battery) status signal sent to HV ECU	Stand by / Ready / Stop
   Sub DC/DC Converter Drive Request (for Charging)	DC/DC converter (for charging auxiliary battery) operation permission signal output by electric vehicle charger assembly	ON or OFF
   Sub DC/DC Converter Operation Permission from Hybrid/EV Control ECU (for Charging)	DC/DC converter (for charging auxiliary battery) operation permission signal output by HV ECU	ON or OFF
   Sub DC/DC Converter Operation Permission to Sub DC/DC Converter (for Charging)	DC/DC converter (for charging auxiliary battery) operation permission signal output by electric vehicle charger assembly	ON or OFF
   Target Sub DC/DC Converter Voltage to Sub DC/DC Converter (for Charging)	DC/DC converter (for charging auxiliary battery) output voltage request from electric vehicle charger assembly	Min.: 0.0 V, Max.: 25.5 V
   Target Sub DC/DC Converter Voltage from Hybrid/EV Control ECU (for Charging)	DC/DC converter (for charging auxiliary battery) output voltage request from HV ECU	Min.: 0.00 V, Max.: 79.99 V
   Target Sub DC/DC Converter Voltage (for Charging)	DC/DC converter (for charging auxiliary battery) target output voltage value	Min.: 0.00 V, Max.: 4.98 V
   Sub DC/DC Converter Output Voltage (for Charging)	DC/DC converter (for charging auxiliary battery) output voltage (sensor value)	Min.: 0.00 V, Max.: 79.99 V
   Sub DC/DC Converter Output Current (for Charging)	DC/DC converter (for charging auxiliary battery) output current (sensor value)	Min.: -327.68 A, Max.: 327.67 A
   Sub DC/DC Converter Constant Current Control (for Charging)	DC/DC converter (for charging auxiliary battery) constant current control state	ON or OFF
   Sub DC/DC Converter Temperature (for Charging)	DC/DC converter (for charging auxiliary battery) temperature (sensor value)	Min.: -40°C (-40°F), Max.: 215°C (419°F)
   Sub DC/DC Converter Stop Request (for Charging) (Over Temperature)	DC/DC converter (for charging auxiliary battery) overheating stop request	ON or OFF
   AC Inverter Operation Status Voltage	AC inverter operation status voltage	-
   AC Inverter Operation Status	AC inverter operation status	-
   AC Inverter Indicator Lamp Status	AC inverter indicator lamp status	-
   AC Inverter Operation Request	AC inverter operation request	-
   AC Charging Negative Relay Status	AC charging negative relay status	-
   AC Charging Positive Relay Status	AC charging positive relay status	-
   Charging Relay Connect Request in CCID Box from CCID Box	CCID (charging circuit interrupt device) relay state request signal	ON or OFF
   Charging Relay Connect Request in CCID Box from Plug-in Control ECU	CCID (charging circuit interrupt device) relay close request signal	ON or OFF
   Rush Current Prevention Resistance Relay Activate Request	Inrush current protection relay operation request signal	ON or OFF