| w/Exhaust Heat Recirculation System | Includes: Disable and Enable High Voltage System.
Includes: R&I Inverter and Converter Assembly.
Includes: R&I Engine and Transmission Assembly with Front Suspension.
DOES NOT include wheel alignment. | 11.2 | | C |
| w/o Exhaust Heat Recirculation System | Includes: Disable and Enable High Voltage System.
Includes: R&I Inverter and Converter Assembly.
Includes: R&I Engine and Transmission Assembly with Front Suspension.
DOES NOT include wheel alignment. | 11.0 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.7 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.5 | | C |
| Combination Procedure: INPUT DAMPER ASSEMBLY: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: OUTPUT SEAL: Remove & Replace: |
| Each | | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| Includes: Programming. | 0.8 | | C |
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: |
| | 0.5 | | C |