Inspection [08/2015 - ]: Procedure
- INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω TEXT IN ILLUSTRATION*a Component without harness connected
(Throttle Body with Motor)If the result is not as specified, replace the throttle body with motor assembly.
- Measure the resistance according to the value(s) in the table below.