LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> 4Runner Venture >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Knock Sensor >> Removal [08/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2015 - ]: Procedure

  1. REMOVE CYLINDER HEAD SUB-ASSEMBLY (for Bank 1) 
    1. Remove the cylinder head (Refer to REMOVAL [08/2015 - ] ).
  2. REMOVE NO. 1 WATER OUTLET PIPE 
    1. Detach the 3 wire harness clamps.
      GTY212342Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts, bolt and water outlet pipe.
  3. REMOVE KNOCK SENSOR 
    1. Disconnect the 2 sensor connectors.
      GTY191273Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and 2 sensors.
scientia non olet · About LEMON Manuals