Removal & Installation
WARNING: This page is about the Camry LE, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Gas,4WD,In-Line4 | Includes: R&I Engine and Transmission Assembly with Front Suspension. DOES NOT include wheel alignment. | 13.0 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| Gas | 0.2 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Gas | 0.2 | C | ||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| Gas | 1.1 | B | ||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Gas | 0.6 | B | ||
| Combination Procedure: OUTPUT SEAL: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Removal & Installation: | ||||
| Gas,4WD,In-Line4 | 0.7 | C | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| Gas,4WD,In-Line4 | 0.7 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Gas | Includes: Programming. | 0.8 | C | |
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| Gas | 0.5 | C | ||