Transaxle Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Highlander Hybrid LE, 2.5L Eng VIN A, which is a different variant/trim than selected.
Includes: Inspect and replace all necessary Transmission and Differential components and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Gas/Electric | Includes: Disable and Enable High Voltage System. Includes: Initialization. DOES NOT include wheel alignment. | 21.2 | A | |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Gas/Electric, Rear | 0.7 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Gas/Electric | 0.5 | C | ||
| Combination Procedure: INPUT DAMPER ASSEMBLY: Remove & Replace: | ||||
| Gas/Electric | 0.3 | C | ||
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| 0.5 | C | |||