LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Venza XLE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Knock Sensor >> Removal [07/2020 - 10/2022] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [07/2020 - 10/2022]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [07/2020 - 10/2022]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the knock control sensor connector.
      GTY762819Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock control sensor from the cylinder block sub-assembly.
      NOTE:

      If the knock control sensor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals