Inspection [11/2021 - ]: Procedure
- INSPECT CAMSHAFT TIMING OIL CONTROL VALVE
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 6.85 to 7.65 Ω If the result is not as specified, replace the camshaft timing oil control valve.
*a Component without harness connected
(Camshaft Timing Oil Control Valve)
- Measure the resistance according to the value(s) in the table below.