Transmission Assembly: Remove, Install, and Overhaul
WARNING: This page is about the 4Runner 40th Anniversary Edition, which is a different variant/trim than selected.
Includes: R&I Transmission Assembly, inspect and replace necessary components and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4WD, w/Electronic Transfer Case | Includes: Initialization. Includes: Confirm Fluid temperature for level check. | 14.1 | A | |
| 4WD, w/o Electronic Transfer Case | Includes: Initialization. Includes: Confirm Fluid temperature for level check. | 14.7 | A | |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: | ||||
| 4WD | 5.8 | A | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| 4WD | 0.3 | C | ||
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| 0.5 | C | |||