Removal & Installation
WARNING: This page is about the Highlander L, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Gas,4WD | Includes:Drain and refill Low Temperature Cooling System. Includes: Programming. DOES NOT include wheel alignment. | 12.9 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| Gas | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Gas, Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Gas | 0.2 | C | ||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: OUTPUT SEAL: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| Gas,4WD | 0.1 | C | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Removal & Installation: | ||||
| Gas,4WD | 0.4 | C | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| Gas,4WD | Includes: R&I Transfer Case Assembly. | 0.7 | C | |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Gas,4WD | Includes: Programming. | 1.2 | C | |
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| 0.5 | C | |||