Installation [02/2024 - ]: Procedure

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Push to lock

   -

1. Perform this procedure only when reusing the vacuum pump assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Coupling Teeth	*b	Groove
   	Install in this Direction	-	-

   1. Install the vacuum pump assembly so that the coupling teeth of the vacuum pump assembly and groove of the camshaft are engaged.
      NOTE:

      • Ensure that the vacuum pump assembly is installed securely.
      • Be careful not to pinch the No. 1 vacuum pump O-ring.
   2. Install the vacuum pump assembly with the 3 bolts.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

      NOTE:

      After installation, check that there are no gaps between the matching surfaces and that the vacuum pump assembly is not installed at an angle.

Refer to INSTALLATION [02/2024 - ]

Refer to ON-VEHICLE INSPECTION [02/2024 - ]