LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2025 >> Crown Signia XLE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Knock Sensor >> Inspection [06/2024 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [06/2024 - ]: Procedure

  1. INSPECT KNOCK CONTROL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1244711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Knock Control Sensor)

      Standard Resistance

      Tester Connection Condition Specified Condition
      G5-1(EKNK) - G5-2(KNK1) 25°C (77°F) 120 to 280 kΩ
    2. If the result is not as specified, replace the knock control sensor.
scientia non olet · About LEMON Manuals