Removal [11/2021 - ]: Procedure

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Disconnect the connector in numerical order as shown in the figure.
      NOTE:

      Make sure that the lock is released before moving the lever in order to avoid damaging the connector.

      HINT: 

      To disconnect the connector, press the claw shown in the figure to release the lock and move the lever in the direction of arrow.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      *a

      Claw

   2. Remove the bolt and ECM.

HINT: 

Perform this procedure only when required.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Alignment marks

   -

   -

   1. Remove the 2 bolts and No. 3 ECM bracket.

      HINT: 

      Using a marker pen, make alignment marks to use for positioning No. 3 ECM bracket during installation.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002