TR6 (Rear)
If toe-in is not to specifications, loosen bolts and nuts securing trailing arm outer bracket to chassis. Add or remove shims between chassis and bracket to obtain correct toe-in. Tighten bolts and recheck toe-in.
NOTE:
Drive vehicle forward or backward before rechecking rear toe-in.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| Spitfire | ||||||
| Front | 4±1 | 3±1 | 1/16 to 1/8 | .... | ..... | |
| Rear | ... | -1±1 | 1/32 to 3/32 | .... | ..... | |
| TR6 | ||||||
| Front | 2 3/4±1 | 1/4±1 | 1/16 to 1/8 | .... | ..... | |
| Rear | .... | -1±1/2 | 0 to 1/16 | .... | ..... | |