Front End Latch Support Bracket Removal And Installation/Replacement

Mobile Repair Possible:  No

Removal Procedure: 

1. Remove front bumper fascia. Refer to FRONT BUMPER FASCIA REMOVAL AND INSTALLATION/REPLACEMENT
2. Remove air scoope mounting bracket. Refer to AIR SCOOPE MOUNTING BRACKET REMOVAL AND INSTALLATION/REPLACEMENT 
3. Remove 3 bolts (1).

   Torque: 15.3 Nm 

4. Remove front end latch support bracket (1).

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following.

   All fasteners must be tightened to torque specification! 

2. Install air scoope mounting bracket. Refer to AIR SCOOPE MOUNTING BRACKET REMOVAL AND INSTALLATION/REPLACEMENT 
3. Install front bumper fascia. Refer to FRONT BUMPER FASCIA REMOVAL AND INSTALLATION/REPLACEMENT