Removal & Installation
WARNING: This page is about the Rabbit L, 2D Hatchback, 1.6L Eng VIN G, Automatic Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4.5 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: | ||||
| 1.0 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: | ||||
| 0.7 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: | ||||
| 0.7 | C | |||
| Combination Procedure: MAINSHAFT BUSHING: Replace: Includes: Replace Oil Seal. | ||||
| 0.3 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.4 | C | |||